Skip to content
Machinery Families

Tillage Solution

Machinery Families

Seeding & Plantation

Machinery Families

Landscaping

Machinery Families

Haulage

Machinery Families

Crop Protection

Machinery Families

Tractor Attachments

Implement Lineup

Rotavator | Rotary Tillers

View All in Catalogue
Implement Lineup

Tipping Trailer

View All in Catalogue

Inquire directly with our engineering plant for custom specifications.

Contact Factory
Implement Lineup

Tractor Dozer

View All in Catalogue

Inquire directly with our engineering plant for custom specifications.

Contact Factory

Extra Heavy Duty Inter Cultivator

The GreenKing Extra Heavy Duty Inter Cultivator is built on a 75 x 40 / 100 x 50 mm channel frame and is offered in four models – GKIC 09, 11, 13 and 15 – carrying 9, 11, 13 and 15 forged 28 mm tynes with 8 mm reversible shovels and 28 mm anchor pins.

Overall frame lengths step from 2000 mm to 3370 mm (810 mm width, 1020 mm height) with a CAT II three-point hitch. Weight runs from 290 kg on the 9-tyne GKIC 09 to 490 kg on the 15-tyne GKIC 15, for tractors from 40 – 45 HP up to 65 – 75 HP.

Clamp Cultivator

The GreenKing Clamp Cultivator mounts 36 mm profile-cut tynes by clamp onto a 72 x 6 T square tube frame, allowing tyne spacing to be adjusted around the standard 230 mm pitch without welding. Offered as GKCC 09 (9 tyne, 2175 x 880 mm) and GKCC 11 (11 tyne, 2315 x 880 mm), it provides 480 mm of frame clearance and 8 mm reversible shovels.

Fitted with a dual CAT I & CAT II hitch, the GKCC 09 weighs 270 kg for 35 – 40 HP tractors and the GKCC 11 weighs 310 kg for 45 – 50 HP tractors.

Rigid Cultivator

The GreenKing Rigid Cultivator is built on an 80 x 80 mm square tube frame and runs across four models – GKRC 09, 11, 13 and 15 – carrying 9, 11, 13 and 15 profile-cut tynes (25, 28 or 32 mm) with 8 mm reversible shovels at an adjustable 418 mm spacing.

Frame dimensions run from 2000 x 810 x 1020 mm on the 9-tyne unit to 3370 x 810 x 1020 mm on the 15-tyne unit, with CAT II three-point linkage (65 x 16 and 50 x 12 mm). Weight runs 240 kg to 330 kg for tractors from 40 – 50 HP up to 80 – 95 HP.

Ford Cultivator

The GreenKing Ford Cultivator combines a 75 x 75 x 10 mm heavy-duty angle frame with 26-coil tension springs (10 mm wire, 50 mm OD) so each tyne trips over buried stones and roots and resets automatically. Models GKFC 09, 11, 13 and 15 carry 9 to 15 forged 50 x 19 T tynes with 8 mm reversible shovels and adjustable 203, 229 or 225 mm (8, 9 or 10 inch) spacing.

Lengths run from 2190 mm to 3561 mm with CAT II linkage. Weight spans 245 kg to 415 kg across the four models, matched to tractors from 35 – 45 HP up to 55 – 60 HP.

Chisel Plough

The GreenKing Chisel Plough is built for breaking compacted hardpan and opening the subsoil without inverting the top layer. Offered as GKCPC 03, GKCPC 05 and GKCPC 07, it carries 3, 5 or 7 profile-cut 32 mm thickness tynes with 560 mm of underframe clearance and a 1220 mm overall height.

Fitted with a CAT II three-point hitch, weight steps from 210 kg on the 3-tyne model to 290 kg on the 5-tyne and 370 kg on the 7-tyne model, for tractors from 40 HP and above up to 60 HP and above.