Disc Plough
Mould Board Disc Plough
A 2 to 4 furrow mould board plough on an 80 x 80 x 7 mm box frame with tempered 8/10 mm boards.
Key Specifications
- Working Width
- 710 – 1310 mm
- Power Req.
- 40 – 75 HP
- Weight
- 235 – 435 kg
- Hitch
- CAT II
The GreenKing Mould Board Disc Plough is built on an 80 x 80 x 7 mm box frame in three models – GKMBDP 02 (2 Furrow, 710 mm width), GKMBDP 03 (3 Furrow, 1010 mm width) and GKMBDP 04 (4 Furrow, 1310 mm width). Each furrow runs a 36 mm profile-cut tyne, tempered 8 / 10 mm mould board and blade, 32 mm bar point and 125 x 50 mm clamp, working up to 350 mm deep.
Underframe clearance is 635 mm (25″) and 685 mm (27″) with a CAT II three-point linkage. Weight steps from 235 kg to 335 kg and 435 kg across the three sizes, for 40 – 50 HP up to 65 – 75 HP tractors.
| Model | GKMBDP 02 | GKMBDP 03 | GKMBDP 04 |
|---|---|---|---|
| Frame (mm) | 80 x 80 x 7 mm Box | ||
| No. of Furrows | 2 Furrow | 3 Furrow | 4 Furrow |
| Dimension of Furrows | 36 mm Profile Cut Tyne | 36 mm Profile Cut Tyne | 36 mm Profile Cut Tyne |
| Mould Board & Blade (mm) | Tempered 8 / 10 mm | ||
| Length x Width x Height (mm) | 1300 x 738 x 1066 mm | 1800 x 738 x 1066 mm | 2460 x 738 x 1066 mm |
| Working Width (mm) ≈ | 710 | 1010 | 1310 |
| Working Depth (mm) ≈ | Up to 350 | ||
| Underframe Clearance (mm) | 635 / 25" & 685 / 27" | ||
| Clamp | 125 x 50 mm | ||
| Bar Point | 32 mm | ||
| Hitch Type | CAT II | ||
| Three Point Linkage | 65 x 16 mm Flat | 32 mm Sq | ||
| Weight (KG) ≈ | 235 | 335 | 435 |
| HP Required | 40 - 50 HP | 50 - 60 HP | 65 - 75 HP |
GKMBDP 02
- Frame (mm)
- 80 x 80 x 7 mm Box
- No. of Furrows
- 2 Furrow
- Dimension of Furrows
- 36 mm Profile Cut Tyne
- Mould Board & Blade (mm)
- Tempered 8 / 10 mm
- Length x Width x Height (mm)
- 1300 x 738 x 1066 mm
- Working Width (mm) ≈
- 710
- Working Depth (mm) ≈
- Up to 350
- Underframe Clearance (mm)
- 635 / 25" & 685 / 27"
- Clamp
- 125 x 50 mm
- Bar Point
- 32 mm
- Hitch Type
- CAT II
- Three Point Linkage
- 65 x 16 mm Flat | 32 mm Sq
- Weight (KG) ≈
- 235
- HP Required
- 40 - 50 HP
GKMBDP 03
- Frame (mm)
- 80 x 80 x 7 mm Box
- No. of Furrows
- 3 Furrow
- Dimension of Furrows
- 36 mm Profile Cut Tyne
- Mould Board & Blade (mm)
- Tempered 8 / 10 mm
- Length x Width x Height (mm)
- 1800 x 738 x 1066 mm
- Working Width (mm) ≈
- 1010
- Working Depth (mm) ≈
- Up to 350
- Underframe Clearance (mm)
- 635 / 25" & 685 / 27"
- Clamp
- 125 x 50 mm
- Bar Point
- 32 mm
- Hitch Type
- CAT II
- Three Point Linkage
- 65 x 16 mm Flat | 32 mm Sq
- Weight (KG) ≈
- 335
- HP Required
- 50 - 60 HP
GKMBDP 04
- Frame (mm)
- 80 x 80 x 7 mm Box
- No. of Furrows
- 4 Furrow
- Dimension of Furrows
- 36 mm Profile Cut Tyne
- Mould Board & Blade (mm)
- Tempered 8 / 10 mm
- Length x Width x Height (mm)
- 2460 x 738 x 1066 mm
- Working Width (mm) ≈
- 1310
- Working Depth (mm) ≈
- Up to 350
- Underframe Clearance (mm)
- 635 / 25" & 685 / 27"
- Clamp
- 125 x 50 mm
- Bar Point
- 32 mm
- Hitch Type
- CAT II
- Three Point Linkage
- 65 x 16 mm Flat | 32 mm Sq
- Weight (KG) ≈
- 435
- HP Required
- 65 - 75 HP
≈ Approximate figure. Specifications may change without notice.
Deep Penetration Discs
Sharpened boron steel discs turn compacted, stubble-covered soil cleanly.
Reinforced Beam
Box section beam resists twisting under heavy draft loads.
Adjustable Disc Angle
Disc and tilt angle set to match furrow width and soil type.
Strong field performance, heavy construction, and simple maintenance make this a reliable implement for soil preparation.