Non-Tipping Trailer
GreenKing 4 Wheel Non-Tipping Trailer
A four-wheel flat-bed farm trailer for produce, inputs and general haulage, unloaded by hand.
Key Specifications
- Power Req.
- 35 – 95 HP
- Weight
- 1600 – 2860 kg
The GreenKing 4 Wheel Non-Tipping Trailer is a flat-bed haulage trailer carried on two axles, so the load sits level and the drawbar weight stays light on the tractor. Four wheels spread the load over soft ground and keep the bed stable when it is loaded unevenly.
Without a tipping ram the bed is simpler and lower, which suits sacked produce, crates, drums and baled material that is handled off the back rather than dumped.
| Model | GKNT4W 05 | GKNT4W 09 | GKNT4W 12 |
|---|---|---|---|
| Capacity | 05 Ton | 09 Ton | 12 Ton |
| Primary Chassis | 150 x 75 mm Heavy Duty Channel | 175 x 75 mm Heavy Duty Channel | 200 x 75 mm Heavy Duty Channel |
| OD (mm) | 10’ x 6’ x 1.75 | 11’ x 6’ x 2.00 | 12’ x 6’ x 2.00 |
| Floor Channel Thickness | 4 mm MS Sheet | ||
| Side Wall Thickness | 3 mm Corrugated MS Sheet | ||
| Tyres | 4 No. | 7.50 x 16 | 4 No. | 8.25 x 16 | 4 No. | 9.20 x 16 |
| Axle | 75 mm Solid Square | 90 mm Solid Square | 100 mm Solid Square |
| Hitch Beam | 125 x 65 Channel | ||
| HP Required | 35 - 45 HP | 50 - 70 HP | 70 - 95 HP |
| Weight (KG) ≈ | 1600 | 2100 | 2860 |
GKNT4W 05
- Capacity
- 05 Ton
- Primary Chassis
- 150 x 75 mm Heavy Duty Channel
- OD (mm)
- 10’ x 6’ x 1.75
- Floor Channel Thickness
- 4 mm MS Sheet
- Side Wall Thickness
- 3 mm Corrugated MS Sheet
- Tyres
- 4 No. | 7.50 x 16
- Axle
- 75 mm Solid Square
- Hitch Beam
- 125 x 65 Channel
- HP Required
- 35 - 45 HP
- Weight (KG) ≈
- 1600
GKNT4W 09
- Capacity
- 09 Ton
- Primary Chassis
- 175 x 75 mm Heavy Duty Channel
- OD (mm)
- 11’ x 6’ x 2.00
- Floor Channel Thickness
- 4 mm MS Sheet
- Side Wall Thickness
- 3 mm Corrugated MS Sheet
- Tyres
- 4 No. | 8.25 x 16
- Axle
- 90 mm Solid Square
- Hitch Beam
- 125 x 65 Channel
- HP Required
- 50 - 70 HP
- Weight (KG) ≈
- 2100
GKNT4W 12
- Capacity
- 12 Ton
- Primary Chassis
- 200 x 75 mm Heavy Duty Channel
- OD (mm)
- 12’ x 6’ x 2.00
- Floor Channel Thickness
- 4 mm MS Sheet
- Side Wall Thickness
- 3 mm Corrugated MS Sheet
- Tyres
- 4 No. | 9.20 x 16
- Axle
- 100 mm Solid Square
- Hitch Beam
- 125 x 65 Channel
- HP Required
- 70 - 95 HP
- Weight (KG) ≈
- 2860
≈ Approximate figure. Specifications may change without notice.
Two-Axle Stability
Four wheels spread the load and keep the bed level when loading.
Flat Load Bed
A low, level bed for sacks, crates, drums and bales.
Light Drawbar Weight
The load is carried on its own axles, not on the tractor.
Strong field performance, heavy construction, and simple maintenance make this a reliable implement for soil preparation.