Post Hole Digger
GreenKing Hydraulic Post Hole Digger
A twin-cylinder hydraulic post hole digger with 12 to 24 inch augers and 1800 mm auger length.
Key Specifications
- Power Req.
- 35 – 50 HP
- Weight
- 550 kg
- Hitch
- CAT II
The GreenKing Hydraulic Post Hole Digger adds two hydraulic jack cylinders with a control valve to a 90 x 6 T square tube and 100 x 50 channel frame, giving positive down-pressure and fast withdrawal in compacted ground. Models GKHPHD 12, 18 and 24 run 12, 18 and 24 inch augers (1800 mm length or custom) with replaceable carbide bits.
Driven at 540 RPM through an SG Iron 11 / 23 or 11 / 25 gearbox with shear-bolt or slip-clutch protection, it digs up to 3.5 feet on a CAT II hitch behind 35 – 50 HP tractors.
| Model | GKHPHD 12 | GKHPHD 18 | GKHPHD 24 |
|---|---|---|---|
| Frame (mm) | 90 x 6 T Square Tube | 100 x 50 Channel | ||
| Auger Diameter Size | 12' Inch Diameter | 18' Inch Diameter | 24' Inch Diameter |
| Hydraulic Cylinder | 2 Nos. Hydraulic Jack Cylinders with Control Valve | ||
| Gear Box | SG Iron 11 / 23 or SG Iron 11 / 25 | ||
| Three Point Hitch | CAT II | ||
| Auger Length | 1800 mm or Custom | ||
| Auger Blade | Replaceable Carbide Bits | ||
| Drive Line Safety | Shear Bolt or Slip Clutch (Optional) | ||
| Max Working Depth | Up to 3.5 Feet | ||
| Gear Box Input RPM | 540 | ||
| Weight (KG) ≈ | 550 ≤ | ||
| HP Required | 35 - 45 | 35 - 45 | 45 - 50 |
GKHPHD 12
- Frame (mm)
- 90 x 6 T Square Tube | 100 x 50 Channel
- Auger Diameter Size
- 12' Inch Diameter
- Hydraulic Cylinder
- 2 Nos. Hydraulic Jack Cylinders with Control Valve
- Gear Box
- SG Iron 11 / 23 or SG Iron 11 / 25
- Three Point Hitch
- CAT II
- Auger Length
- 1800 mm or Custom
- Auger Blade
- Replaceable Carbide Bits
- Drive Line Safety
- Shear Bolt or Slip Clutch (Optional)
- Max Working Depth
- Up to 3.5 Feet
- Gear Box Input RPM
- 540
- Weight (KG) ≈
- 550 ≤
- HP Required
- 35 - 45
GKHPHD 18
- Frame (mm)
- 90 x 6 T Square Tube | 100 x 50 Channel
- Auger Diameter Size
- 18' Inch Diameter
- Hydraulic Cylinder
- 2 Nos. Hydraulic Jack Cylinders with Control Valve
- Gear Box
- SG Iron 11 / 23 or SG Iron 11 / 25
- Three Point Hitch
- CAT II
- Auger Length
- 1800 mm or Custom
- Auger Blade
- Replaceable Carbide Bits
- Drive Line Safety
- Shear Bolt or Slip Clutch (Optional)
- Max Working Depth
- Up to 3.5 Feet
- Gear Box Input RPM
- 540
- Weight (KG) ≈
- 550 ≤
- HP Required
- 35 - 45
GKHPHD 24
- Frame (mm)
- 90 x 6 T Square Tube | 100 x 50 Channel
- Auger Diameter Size
- 24' Inch Diameter
- Hydraulic Cylinder
- 2 Nos. Hydraulic Jack Cylinders with Control Valve
- Gear Box
- SG Iron 11 / 23 or SG Iron 11 / 25
- Three Point Hitch
- CAT II
- Auger Length
- 1800 mm or Custom
- Auger Blade
- Replaceable Carbide Bits
- Drive Line Safety
- Shear Bolt or Slip Clutch (Optional)
- Max Working Depth
- Up to 3.5 Feet
- Gear Box Input RPM
- 540
- Weight (KG) ≈
- 550 ≤
- HP Required
- 45 - 50
≈ Approximate figure. Specifications may change without notice.
Interchangeable Augers
Auger sizes swap on the same drive for fencing, orchard, and pole work.
Hardened Gearbox
Cast iron housing with bevel gears rated for continuous digging duty.
Replaceable Teeth
Bolt-on cutting teeth and pilot bit are replaceable in the field.
Strong field performance, heavy construction, and simple maintenance make this a reliable implement for soil preparation.